...Visual Interface (DVI) cables. • Digital Visual Interface (DVI) cables • The Digital Visual Interface (DVI) standard is based on transition-minimized differential signaling (TMDS). In a typical single-line digital signal, voltage is raised to a hig...
...twisted-pair (STP) cable is preferred. These environments contain radio-frequency interference (RFI) and/or electromagnetic interference (EMI). The shielding in STP protects the data being transmitted through the cable and it keeps the cable it...
Crossover Cable • Crossover Cable • Crossover cable is generally used for hub-to-hub connections. The send and receive pairs are crossed between Connector A to Connector B on either end of the cable. There are two standards for the pairing of ...
...Explains: Fibre Optic Cable • Fibre optic cable is one of the fastest growing transmissions mediums for both new cabling installations and upgrades, including backbone, horizontal and even desktop applications. • The Black Box explain series make ...
...video over CATx cable at distances greater than 30 metres. • As cable length increases, picture quality decreases. Smearing is caused by the cable attenuating high-frequency signals. The image is also dimmer because of the cable’s resistance...
To clearly identify your pin-outs for keyboard, mouse, serial, video, ... interfaces, see our Connector Guide. • Please first choose your connector category from menu on the left. •
...of video on fibre optic cable. • Advantages of fibre optic cable over copper coax cable to transmit video • Superior performance • Fibre cable supports a very high data rate and yields a very low signal loss. So you get sharp, clear video over far g...
Fibre cable and pulling eyes • Fibre cable and pulling eyes • A damaged Fibre Optic Cable during Pulling • Fibre optic cable can be damaged if pulled improperly. Broken or cracked fibre, for example, can result from pulling on the fibre core o...
納期を問い合わせする
ログイン
お問い合せ
